Custom 2014+ BMW F Chassis M Steering Wheel

Airbag

The airbag module is not included. You can simply transfer your own factory airbag over to the custom design steering wheel. For any reason(s) you might need an airbag replacement, you can add it into your cart by checking the checkbox on the configurator selection column. Please ensure to select the correct type of airbag you need in accordance with the type of airbag you have currently. (ie. Single stage, dual stage)

______

Infotainment button and controls

Infotainment buttons with wiring harness are not included unless you have selected a customization for the infotainment button trim. For your M car, you will be provided with the M1/M2 buttons.

______

Cruise control

Cruise control with or without speed limiter feature is not affected.

______

Active cruise control with speed limiter and traffic jam assistant

If you have this function, touch sensor functions of the steering wheel will be lost. However, the cruise control function with the speed limiter can still work.

______

Lane departure assist

If your vehicle is equipped with lane departure assist that sends a vibration alert through your steering wheel, please ensure that you inform us by checking the checkbox in the configurator selection column. You can transfer your own vibration module to the custom design steering wheel.

______

Heated steering wheel

If your factory steering wheel originally comes with a heating feature, this feature will be disabled when you install a custom rebuilt steering wheel. You can choose to retain or abandon the feature. Please select from the configurator selection column whether you want to retain or abandon the feature. Simple wiring connections will be required to install the heating feature. Please note that heating function will only be available on the side grips where the leather is at. Carbon fiber parts will not have heating.

______

Paddle shifters

Standard paddle shifters are included in this steering wheel set as standard. Wiring harness is not included. Should you prefer to use your own factory paddles, you may. Please transfer your own paddle shifter wiring harness and hardware.

______

LED Shift Lights with vehicle information display

LED Shift Lights display will be pre-installed for you. No coding or programming will be required for the LED Shift Lights to work. Installation process will be plug and play. You will be required to connect the 12-volt and ground wire that is included and pre-installed. The 12-volt wire must be connected to a power source of a minimum rating of 12-volts. This power source can be tapped from your wiring harness from your clock-spring. Testing with a voltmeter is recommended. Please secure the ground and 12-volt wire securely to prevent disconnection. A wireless OBD2 blue-tooth connector will be provided in the package. After the 12-volt and ground wires are installed, connect the OBD2 connector into your OBD2 port. Start your vehicle, press, and hold the 2 buttons on the display panel simultaneously for approximately 5 seconds until the display starts up.