Custom 2017+ F / G Chassis M Sport Steering wheel

Airbag

The airbag module is not included. You can simply transfer your own factory airbag over to the custom design steering wheel. For any reason(s) you might need an airbag replacement, you can add into your cart via by checking the checkbox from the configurator selection column. Please ensure to select the correct type of airbag you need in accordance with the type of airbag you have currently on your steering wheel. (ie. Single-stage, dual-stage)

______

Infotainment button and controls

Infotainment and heated steering wheel buttons are not included. You can simply transfer your factory ones with wiring and hardware to the custom design steering wheel. Please ensure that you have selected the correct buttons and layout you have from the configurator selection column in accordance with what you have currently on your steering wheel.

______

Cruise control

Cruise control with or without speed limiter feature is not affected.

______

Active driving assistant plus/pro package with traffic jam assistant

Hands detection on the steering wheel feature will be disabled. The semi-autonomous driving feature can still operate. However, the system will no longer be able to prompt you to take over driving when required. This is due to the removal of factory touch sensors underneath the leather when we rebuild the steering wheel. Please make sure you do not use the driving assistant feature without supervision as it is not intended to be fully autonomous. A decoder module will be included in the package when your selected type of buttons/layout tells us that you possess the above-mentioned features. The decoder module must be installed to prevent any check lights. The installation of the module is simple, and a guide is included on the website. If you are unsure of the process, please contact us at support@caworks.store.

______

Lane departure assist

If your vehicle is equipped with lane departure assist that sends a vibration alert through your steering wheel, please ensure that you inform us by checking the checkbox from the configurator selection column. You can transfer your own vibration module to the custom design steering wheel.

______

Heated steering wheel

If your factory steering wheel originally comes with a heating feature, this feature will be disabled when you install a custom rebuilt steering wheel. You can choose to retain or abandon the feature. Please select from the configurator selection column whether you want to retain or abandon the feature. Simple wiring connections will be required to install the heating feature. Please note that heating function will only be available on the side grips where the leather is at. Carbon fiber parts will not have heating. If you have selected that you have a heating feature, regardless of whether you chose to retain the feature or not, the correct center trim will be included. For instance, inner center trim with or without heating button cutout.

______

Paddle shifters

Standard paddle shifters are included in this steering wheel set as standard. Wiring harness will be included. Should you prefer to use your own factory paddles, you may. Please transfer your own paddle shifter wiring harness and hardware. If your vehicle does not come equipped with paddle shifters from factory, please consult your local specialist shop for wiring and coding services to activate the feature.

______

LED Shift Lights with vehicle information display

LED Shift Lights display will be pre-installed for you. No coding or programming will be required for the LED Shift Lights to work. Installation process will be plug and play. You will be required to connect the 12-volt and ground wire that is included and pre-installed. The 12-volt wire must be connected to a power source of a minimum rating of 12-volts. This power source can be tapped from your wiring harness from your clock-spring. Testing with a voltmeter is recommended. Please secure the ground and 12-volt wire securely to prevent disconnection. A wireless OBD2 blue-tooth connector will be provided in the package. After the 12-volt and ground wires are installed, connect the OBD2 connector into your OBD2 port. Start your vehicle, press, and hold the 2 buttons on the display panel simultaneously for approximately 5 seconds until the display starts up.